Beast 60e ARF

Dhs. 1,545.00
Key Features
  • Lightweight laser-cut balsa and plywood construction
  • High power-to-weight ratio with 3D capability
  • Fast four-screw and four-pin field assembly
  • Two-piece, plug-in wings with carbon joiner tube
  • Ready-to-mount the recommended high-output E-flite® Power 60, 470Kv motor
  • Large magnetic nose hatch provides ample access to battery and electronics
  • Independent and simple direct-link servo installation
  • Steerable tailwheel and quality hardware package
  • Large control surfaces with double-beveled hinge lines
  • Genuine Hangar 9® UltraCote® covering
  • Pre-painted fiberglass cowling and wheel pants
  • Durable aluminum landing gear with painted finish

 Needed To Complete

  • 6+ channel transmitter and radio system
  • (4) mini servos and (2) standard servos
  • 60-size brushless outrunner motor
  • Propeller
  • 3-inch parabolic (P-51 style) spinner
  • 80-amp brushless ESC
  • 22.2V 6S 4400-5000mAh 30C LiPo flight batter
  • Charger for flight battery
  • Pilot figure (OPTIONAL)

Spec:

  • Motor Size: 60-size brushless outrunner
  • Assembly Time: 7-10 Hours
  • Control Throw (Ailerons): Low: 1-3/4 in (45mm) up/down, 10% expo; High: 2-15/16 in (75mm) up/down, 30% expo
  • Control Throw (Elevator): Low: 2-15/16 in (75mm) up/down, 10% expo; High: 5-1/8 in (130mm) up/down, 30% expo
  • Control Throw (Rudder): Low: 3-3/4 in (95mm) right/left, 10% expo; High: 4-1/2 in (115mm) right/left, 30% expo
  • Flaps: No
  • Flying Weight: 8.90-9.55 lb (4.05-4.35 kg)
  • Is Assembly Required: Yes
  • Main Wing Tube Length: 22.9 in (582mm)
  • Main Wing Tube OD: 16mm O.D.
  • Recommended ENVIRONMENT: Outdoor
  • Retracts: No
  • Spinner Size: 3.0 inch P-51 style
  • Wingspan: 57.0 in (145 cm)