F15 90 PNP

Dhs. 1,760.00

The F-15C Eagle is arguably the world’s most successful fourth generation fighter jet. It boasted the highest thrust, fastest top speed, furthest range, highest combat kill ratio and longest service life among its contemporaries. Our team worked closely with Freewing to develop an RC model which brings the excitement and scale performance of this hallmark aircraft to your local flying field, and which appropriately honors the F-15’s rightful place in aviation history. We chose the livery of AF85102 “Gulf Spirit” of the 58th TFS/33rd TFW, whose pilots combined for three kills with the aircraft during the Gulf War in 1991 and continued on strength with the 12th FS into the 2000s. 

Freewing’s F-15C boasts a powerful single 90mm power system and features a range of scale details which set it apart from any other electric F-15 ever produced. Accurate airframe lighting using Freewing’s “Daybright” LEDs, sequenced gear doors and landing light, aluminum landing gear struts with ample compression for operation on short grass or pavement, and metal trunnion retracts for durability. The aircraft also features highly detailed 30 piece plastic exhaust nozzles which rival the 3D detail level of RC turbine jets costing thousands of dollars, and an electric servoless driven speed brake which works in conjunction with the flaps to stabilize that perfect scale landing approach. Other iconic details include a plastic molded Vulcan cannon, pitot tube and antennas, ECM blisters, and the five grilles along the intakes. The leading edge of the intakes themselves are shrouded in thin plastic to maintain their shape and prevent against dings. The elevator mounting and control hardware is reinforced to provide rigidity in high-G maneuvers. Each F-15C also uses over 100 waterslide decals, meticulously applied at the factory by hand to finish off the iconic look of an F-15C Eagle on the flightline.

Beyond its outer scale fidelity, we worked with Freewing to optimize this F-15 for ease of use, making it a great choice for weekend flying. A single 90mm powers the aircraft for better efficiency versus a twin 70mm setup, and the bifurcated outlets are sized at 88% FSA total. The fiberglass nose cone easily detaches with magnets, and the wings can be removed for transport. In fact, the PNP model assembles entirely with only 14 screws, and all surfaces can be removed for transport, repair, or replacement. A thin plastic sheet covers the rear of the cockpit to ward against bubbling in the sun, although as always with EPO foam models we recommend limiting prolonged sun exposure and heat.

Intended as a "Scale Plus" flyer, the Freewing F-15C excels in scale maneuvers and stability throughout its flight envelope. The aircraft's wing and elevator use semi-scale airfoils, and at the middle throttle range the aircraft is floaty with a mild stall at slow speed. Compared to other 90mm jets, we would rank the F-15 as one of the more easy to fly, although with its scale narrow landing gear stance, the model must be slowed down after landing before tightly turning, to prevent possibly scraping a wingtip. In the air, the Freewing F-15C’s climb rate, roll rate, top speed, and overall agility are virtually identical to the Freewing T-45. With speed brakes and flaps deployed, we clocked the F-15’s landing speed at 21mph, and we clocked an average top speed of 94mph in level flight. With mixed throttle, an Admiral 6s 5000 mAh 50c battery gives 3-4 minutes of flight, like other Freewing 90mm jets. The F-15C is designed to CG with two Admiral 4s 4000s, for pilots wanting to use their own 8s EDF/motor/ESC power system for the ultimate in thrust and speed for a scale foam jet.


  •  Large scale electric ducted fan RC jet sporting an accurate livery
  • Powerful 1550kV outrunner motor provides the optimal balance of thrust/top-end speed and overall flight time
  • 12 Blade factory balanced EDF with metal housing for realistic jet turbine-like sound (PNP only)
  • Composite fan blades combined with metal EDF housing ensure AMA compliance (the fan blades themselves are NOT metal, so there are no flying restrictions - PNP only)
  • Hobbywing 130 Amp Hobbywing ESC with 8A UBEC (PNP only)
  • Electric retracts with scale, shock-absorbing struts and main operation, CNC'd from 6061 aluminum and suitable for pavement or short grass
  • Electric wormgear-driven air brake
  • Sequenced gear doors provide added realism and reduced drag
  • Removeable wings and flight surfaces, including a magnetic nose cone, for easy transport and compact storage
  • Machine screws and brass threaded inserts are used to attach the wings for a secure fit and longevity
  • Bright LED navigation lights for enhanced realism and dawn/dusk maneuvers
  • Carbon fiber wing spars and reinforced body parts
  • Upgraded pushrod clevis and metal ball head connectors on elevators provide a robust connection between servo and control surface and eliminate "slop"
  • Nylon, gapless hinges on all control surfaces (superior to foam hinges)


  • Wingspan - 965mm / 37.9in
  • Length - 1450mm / 57.08in
  • Flying Weight - 3080g / 108.64oz
  • CG (Center of Gravity) - 118mm from the leading edge of the wing at the root
  • Power System - 3748-1550kV Brushless Outrunner Motor
  • Electronic Speed Control - 30A ESC, 8A UBEC, EC5 Connector (PNP only)
  • Propeller / EDF- 90mm Metal Housing EDF with 12 Blade Fan
  • Servos :
    9g metal gear standard with 550mm lead: Nose gear door, nose steering
    9g metal gear standard with 100mm lead: Rear cabin right
    9g metal gear reverse with 100mm lead: Rear cabin left
    17g metal gear standard with 550mm lead: Left aileron, right aileron
    17g metal gear standard with 300mm lead: Left flap
    7g metal gear reverse with 300mm lead: Right flap
    7g metal gear standard with 100mm lead: Left elevator, rudder
    17g metal gear reverse with 100mm lead: Right elevator
  • Landing Gear - CNC electric retracts with scale, shock-absorbing struts and main operation
  • Main Wheels - 60mm tall, Nose Wheel = 45mm tall
  • Required Battery - 6S 22.2V 5000mAh 50C LiPo (not included)
  • Required Radio - Minimum 7 Channel (required)
  • Ailerons - Yes
  • Elevator - Yes
  • Rudder - Yes
  • Hinge Type - Nylon hinges
  • Material - EPO Foam