Pandora PNP Red

Dhs. 590.00

The Freewing Pandora is not only one of the best beginner planes on the market, it is a great intermediate plane too. How is this possible? The Pandora ships as a high wing trainer. Simply change the canopy to the included low wing canopy and move the wings to the bottom of the fuselage and you now have a light sport low wing plane perfect for an intermediate pilot. In addition there are two sets of wheels. There is a set of tricycle landing gear which the Motion RC Pilots think looks best on the low wing plane, and there is a set of "Big Wheel" landing gear in tail dragger format which is perfect for grass and dirt takeoff/landing. The "Big Wheels" even work on


  • High wing and low wing configuration included in one plane
  • Tricycle landing gear and tail dragger landing gear included
  • Included BIG wheels for tall grass takeoff and landings
  • Molded wing pocket for optional flap servos - hardware and push rods are included
  • Durable EPO foam construction
  • Nylon hinges on all control surfaces
  • Brushless motor, ESC, and 4 micro servos installed


  • Wingspan - 1410mm / 55.5in
  • Length - 1200mm / 47.2in
  • Flying Weight -  2600g / 91.7oz
  • CG (Center of Gravity) -  Check Manual
  • Power System - 4250-580kV Brushless Outrunner Motor
  • Electronic Speed Control - 65A with T-Connector
  • Wingspan - 1400mm/55.1in
  • Length - 1180mm/46.5in
  • Flying Weight -  1500g / 53 ounces
  • Power System Brushless -  3536-800Kv
  • Speed Control - 30A, Internal BEC, T connector
  • Propeller / EDF - 11x6 3 blade prop
  • Servos Ailerons: 9g standard with 550mm lead
  •              Elevator: 9g standard with 300mm lead
  •              Rudder: 17g standard with 300mm lead
  •              Flap Left: 9g standard with 300mm lead
  •              Flap Right: 9g reverse with 300mm lead
  • Landing Gear -  Fixed tricycle or tail dragger. Small or large wheels
  • Required Battery - 11.1V 2200mAh 25C 3 cell LiPo
  • Required -  Radio 4 Channel
  • Rudder - Yes
  • Flaps Optional -molded servo area and flap cut outs
  • Ailerons - Yes
  • Lights - no
  • Hinge Type -  Nylon hinges on all control surfaces
  • Material -  EPO Foam